1. PRODUCT IDENTIFICATION:

   Atlas Fibre Company
   3721 W. Chase Avenue
   Skokie, Illinois 60076
   Emergency Telephone # 847-674-1234

   Chemical Name: See chart
   Chemical Family: Thermoset Laminates
   Trade Name & Synonyms: none

2. HAZARDOUS INGREDIENTS:

   Substances listed are those identified as being present in concentrations of 1% or greater, or 0.1% if substance is listed as a potential carcinogen. NONE

3. PHYSICAL DATA:

   Melting Point: See Chart
   Vapor Pressure: N/A
   Vapor Density: NIA
   Solubility in Water: NIA
   Appearance: Sheet, Rod, Tube, and Machined Parts
   Specific Gravity: (H20 = 1): See Chart
   Percent Volatile by Volume: .3 - 1.0%
   Evaporation Rate: N/A
   Color: Various, Natural to Black
   Odor: None to slight
   

4. FIRE AND EXPLOSION HAZARD DATA:

   Flash Point: N/A
   Flammability Limits: N/A
   Extinguishing Media: Water, Carbon Dioxide, Dry Chemical
   Special Fire Fighting Procedures: For significant fires, use self contained positive pressure breathing apparatus and wear full protection
   Unusual Fire and Explosion Hazard: May give off any or all of the hazardous decomposition products listed. Dust from dry fabrication operations may be explosive if mixed with air in critical proportions in the presence of ignition.
   

5. HEALTH HAZARD DATA:

   Threshold Limit Value: No TLV exist for thermoset laminate plastic shapes. The hazards associated with thermoset laminate plastic shapes are for the products of combustion; See Chart.
   Effects of Overexposure: Inhalation of dust may cause respiratory irritation. may cause skin or eye irritation.
   Emergency and First Aid Procedures: In the event of acute exposure, remove to fresh air, administer oxygen, and seek physician's assistance.
   

6. REACTIVITY DATA:

   Stability: Stable
   Incompatibility: Not Incompatible
   Hazardous Decomposition Products: See Chart
   Hazardous Polymerization: N/A
   Conditions to Avoid: When heated to decomposition or combustion temperatures, hazardous products of combustion occur as shown - See Chart
   

7. SPILL OR LEAK PROCEDURES:

   Steps to be taken in case material is released or spilled: N/A Waste Disposal Method: Approved landfill site in compliance with Federal, State, and Local regulations.
   
   

8. SPECIAL PROTECTION INFORMATION:

   Respiratory Protection: If machining operations are not adequately ventilated, a N.I.O.S.H. approved respirator should be worn.
   Ventilation: Mechanical(general) preferable, local exhaust acceptable.
   Protection Equipment: When machining thermoset laminate plastics, face shield or safety glasses should be worn. In general, protection beyond established industrial safety practices and adequate ventilation is not required.
   

9. SPECIAL PRECAUTIONS:

   Precautions to be taken in Handling and Storage: None
   Other Precautions: When fighting fires use a self contained breathing apparatus.
   

ATLAS FIBRE COMPANY 1-800-323-1408 (In Illinois: 1-847-674-1234) FAX: 1-847-674-1723 E-mail: info@atlasfibre.com